Underwood Plaza on Dickson Street in Fayetteville, Arkansas

Units Available for Sale or Lease

2010-07-29T08:12:00.004-05:00

Take a Tour of Underwood Plaza with Bill Underwood

2009-04-22T06:33:00.003-05:00

View Bill's series of interviews, and watch footage of the building, interior finishes, common areas, balcony views and much more here:

http://www.local540.com/marketplace/businesses/ama-real-estate-group-inc/videos/

Latest Underwood Plaza Pics

2009-04-21T05:23:00.005-05:00

Underwood Plaza

2009-03-09T14:15:00.001-05:00

Underwood Plaza is ready for you to tour anytime. Call Sheree Alt at 479.236.7116 to schedule a time.

Three Different Interior Finishes Available - Traditional, Metropolitan or Urban Loft

2009-02-18T03:33:00.004-06:00

Metropolitan

Urban Loft

Traditional

September 15, 2008, Underwood Plaza Update

2008-09-15T22:05:00.002-05:00

Visit Underwood Plaza Before Every Home Razorback Football Game

2008-09-08T12:16:00.002-05:00

Visit Underwood Plaza on W. Dickson St. before every home Razorback football game. Save the following dates to enjoy pre- and post-game tours. Explore upscale downtown Fayetteville lofts and commercial spaces:

September 20th
October 4th
October 25th
November 1st

Contact Alexander Merry-Ship & Alt Real Estate Group, Inc., for additional information at www.amaregi.com or 479.443.1313.

March 18, 2008, Underwood Plaza Update

2008-03-18T22:32:00.000-05:00

March 17, 2008, Underwood Plaza Update

2008-03-17T22:25:00.000-05:00

March 14, 2008, Underwood Plaza Update

2008-03-14T21:45:00.002-05:00

The fire sprinkler riser with hose stations continued to be run at the south staircase.

Piers continued to be drilled and poured at the Parking Deck.

Grading continued at the Parking Deck. Rock base was laid down at the south half of the Parking Deck.

The copper trim subcontractor was on site field measuring and coordinating with the roofing subcontractor.

Installation of roofing insulation and membrane continued at the main roof and at the top of the two towers.

The dirt ramp from Underwood Jeweler parking lot down to the Parking Deck area was removed.

Masonry installation and washing was completed at the West Elevation.

Exterior sheathing board continued to be installed at the towers.

Rock base was laid down at the North Elevation for the mason’s mobile scaffolding and the scaffolding was disassembled at the West Elevation and moved to the North Elevation.

The sprayed fireproofing subcontractor was back on site spraying structural steel.

Excavation continued for grade beams at the Parking Deck.

Fire rated shaft-wall liners continued to be installed at the south staircase.

The elevator subcontractor arrived with his rails, doors and cab parts.

Clad wood doors continued to be installed at the North Elevation.

Roof insulation was being installed at the perimeter eyebrow at the main roof level.

Metal stud partitions were being framed up at the 9th Floor.

Reinforcing steel for the Parking Deck grade beams were delivered.

March 7, 2008, Underwood Plaza Update

2008-03-07T19:07:00.000-06:00

Excavation took place for the grade beam along the south side of the Parking Deck.

Reinforcing steel cages for the piers at the Parking Deck continued to be brought on site.

Copper water piping continued to be run throughout the building.

Fire sprinkler standpipes for hose stations were run at the two main staircases.

The mason continued setting miscellaneous cast stone pieces at the West Elevation.

February 29, 2008, Underwood Plaza Update

2008-02-29T14:56:00.000-06:00

With masonry complete at the West Elevation, the mason was washing the brick and cast stone as he lowered his mobile scaffolding.

The pier driller mobilized to drill piers for the Parking Deck. The pier reinforcing steel cages were brought on site. Piers began to be drilled and poured.

Excavation continued at the Parking Deck area. An area of poor soil was encountered and removed and filled with structural borrow material.

The utility company was relocating electrical power feeding Underwood Jeweler’s.

The roof top air handling unit was brought on site and hoisted to the roof and set with the tower crane.

Wood blocking continued to be installed at the perimeter of the main roof.

Exterior metal stud framing continued at the two towers at the main roof level.

Plumbing rough in continued within the building, including gas piping and water piping.

Fire rated shaft wall liner panels continued to be installed, including at the elevator machine room.

Ductwork continued to be hung over the upper floors.

February 23, 2008, Underwood Plaza Update

2008-02-25T17:12:00.002-06:00

The installation of the main roofing commenced.

Felt paper continued to be installed at the East Elevation.

The main ductwork for the rooftop air handler unit was being hung over the 9th Floor.

Brick continued to be laid up at the East Elevation at the north end at the 1st Floor Level.

The loggia columns at the East Elevation were sheathed. Felt paper was being applied to the columns.

A temporary dust wall was installed at the East Elevation at the 2nd Floor Level where the main building ties into Powerhouse Row.

2-hour rated shaft wall liner panels continued to be installed at the north stair.

Coping stone was laid at the 6th Floor balcony wall at the West Elevation.

Various exterior openings were being closed up with foam and urethane sealant.

The mason began washing brick at the West Elevation.

Dewatering was taking place at the Parking Deck excavation in preparation for commencement of pier drilling.

The east tower was being scaffolded up in preparation for metal stud framing and sheathing.

February 17, 2008, Underwood Plaza Update

2008-02-17T20:28:00.002-06:00

Site excavation and grading continued towards the west end of the Parking Deck area.

The roofer arrived with his materials, including insulation board and roofing membrane. Materials were flown up on the roof.

Installation of shaft wall framing and liner panels continued at the elevator hoist-way and at the north staircase.

The electrical contractor was wiring up and installing the main distribution panels at the upper floors.

Metal stud framing and brick support steel was being installed at the 6th Floor balcony on the west side.

Sheathing board and felt was installed in preparation for masonry.

Plumbing rough in, along with pipe insulation, continued at the upper floors, including at kitchen island knee walls.

Roof top air conditioning equipment support curbs were installed.

The south stair was completed up to the roof level.

Brick began being installed at the East Elevation along the alley between our building and the Garrison Building.

Exterior wood doors and windows continued to be installed at the North Elevation.

Sprinkler piping was being installed over the upper floors.

February 9, 2008, Underwood Plaza Update

2008-02-09T19:49:00.000-06:00

Exterior sheathing board continued to be applied at the East Elevation.

Framing of the parapet and installation of plywood sheathing and wood blocking continued at the roof

Drains were installed at the main roof in preparation for the roofer starting.

Brick support relief angles were being installed at the 5th Floor Level at the West Elevation. The mason installed through wall flashing along the top of the angles and continued laying brick from the 5th Floor Level up.

Plywood floor decking was installed at the corridor ramp on the 2nd Floor.

Plumbing rough in continued at the upper floors.

Site excavation and grading commenced at the west end of the parking deck area.

Exterior wood doors and windows were being installed at the North Elevation.

Shaft wall framing and liner panels were being installed at the elevator hoist-way and at the north staircase.

February 2, 2008, Underwood Plaza Update

2008-02-02T21:15:00.000-06:00

Masonry continued at the west elevation with brick and cast stone being laid from the 4th Floor Level up to the 5th Floor Level.

The roof framing and decking for the two towers were flown up and set into place.

The south stair was erected all the way up to the roof level.

Roof parapet framing continued to be erected.

The partition walls for the public restrooms on the 3rd Floor Level was being framed up.

A topping out ceremony took place with guests present. A ceremonial final beam, with a tree for luck and the American flag, was flown into place on top of the east tower.

Exterior sheathing continued at the east elevation.

The elevator shaft walls were being erected.

Interior walls along the 2nd Floor breezeway and main corridor continued to be framed up. Drywall was being installed at the 2nd Floor.

January 26, 2008, Underwood Plaza Update

2008-01-26T07:09:00.000-06:00

Roof perimeter steel framing continued to be welded up on the ground and flown into place.

Masonry continued to be laid up at the west elevation between the 3rd and 4th Floor Levels.

The over-framed floor at the 2nd Floor Level next to the breezeway was framed up, along with the breezeway walls. Sheathing board was being installed at the walls along the breezeway stair.

Interior partitions continued to be framed up at the 2nd Floor Level.

The center stair at the north elevation from the 2nd Floor Level down to Dickson Street was installed and concrete was poured.

The cooling tower, along with the boilers and the heat exchanger, were brought on site on trailers and flown up to the roof and placed.

Electrical and plumbing rough in continued at upper floor partition walls.

Exterior walls continued to be framed up at the 8th Floor Level.

SWEPCO continued working along Powerhouse Avenue installing new power poles.

Sheathing board was being installed at the east elevation.

Roof decking was installed on the tower roof framing on the ground, in preparation to being flown into place.

The walls around the 1st Floor Mechanical/Electrical Room were being framed up.

The mechanical closets at the 3rd Floor shell space were being framed up.

Piping was being insulated.

Roof drain piping continued to be hung over the 9th Floor.

Roof parapets were being framed up.

The south stair was being erected from the 8th to the 9th Floor Level.

January 19, 2008, Underwood Plaza Update

2008-01-19T06:43:00.000-06:00

Interior partition walls continued to be studded up at the upper floors.

Exterior sheathing board continued to be applied at the west elevation at the 6th through the 8th Floor Levels and at the south elevation at the 7th Floor Level. Sheathing board was being installed at the east elevation from the 2nd Floor Level up to the 6th Floor Level, above the loggia.

Exterior walls were being studded up at the south elevation at the 8th Floor Level.

Preparations for the roof level slab were completed with perimeter angles being completed and reinforcing steel, pipe sleeves and duct block-outs being installed. The roof slab was poured.

Bar joists and bridging were being installed at the south end roof. Perimeter angles were being welded up on the ground and flown up into place. Roof decking began being installed at the south end roof.

Masonry continued to be laid at the west elevation, now above the 3rd Floor Level up to the 4th Floor Level.

HVAC copper piping and cast iron drain lines continued being run over the upper floors. PVC roof drain lines were being hung below the main roof.

The plumbers were laying out walls at the 9th Floor Level and core drilling holes for pipe penetrations.

Equipment pads were formed and poured at the Roof Level mechanical room.

Liquid waterproofing was being applied at the north elevation foundation wall, in preparation for masonry installation there.

Over the weekend, SWEPCO began installing poles for high-voltage power lines along Powerhouse Avenue.

Masonry support relief angles were welded into place along the west elevation at the 4th Floor Level.

January 11, 2008, Underwood Plaza Update

2008-01-11T23:11:00.000-06:00

The exterior door and window openings at the east side of the 1st Floor restaurant space were being framed up.

Exterior sheathing and felt continued being installed at the east elevation.

Masonry installation continued at the west elevation at the 2nd Floor Level. Load relieving support angles were installed and masonry began being installed at the 3rd Floor Level.

Wood blocking was being installed along the edges of the exterior porches and balconies.

Electrical rough in continued at the upper floors.

Membrane flashing was being installed at the exterior balcony door jambs and sills.

Plumbing rough in, including gas piping, PVC drain lines, copper condenser water piping and cast iron drain piping, continued at the upper floors.

Exterior metal stud framing for the two towers reached the 9th Floor Level.

Perimeter bent plate and angles, along with steel decking, were being installed at the concrete portion of the main roof.

The long east porch at the 9th Floor Level was poured.

January 5, 2008, Underwood Plaza Update

2008-01-05T22:46:00.000-06:00

With falling temperatures, temporary cover and heating was put in place to allow masonry installation at the west elevation at the 2nd Floor Level to continue.

Exterior sheathing board continued to be installed at the east elevation. Felt began being installed at the east elevation.

The long west porch at the 9th Floor Level was poured.

The north entry landing at Dickson Street at the center of the building was poured.

PVC drain lines were being run over the 2nd Floor Level.

Shower pans and bathtubs continued being set at the upper floor levels.

December 29, 2007, Underwood Plaza Update

2007-12-29T16:13:00.000-06:00

Bathtubs were being distributed up to the 4th – 6th Floors and began being installed.

The mason’s mobile scaffold system arrived and was placed at the west elevation. Overhead framing was installed and plastic sheeting was being installed at the scaffolding in preparation for heating and masonry installation during cold weather.

The electrical contractor continued running armored cabling throughout the building.

The elevator machine assemblies were lifted into place at the top of the elevator shafts.

The parapet walls at the 8th Floor north roof terrace were framed up.

Metal stud framing and sheathing board continued to be installed at the exterior of the building at the 7th Floor Level and sheathing board was being installed at the east elevation.

Wood blocking continued to be installed at exterior window openings at the upper levels.

Pipe risers continued to be run to the upper levels at the north pipe chase.

Concrete was poured at the northeast stair and landing from Dickson Street down to the 1st Floor Level.

December 21, 2007, Underwood Plaza Update

2007-12-21T15:57:00.000-06:00

The mason began laying cast stone and brick at the 2nd Floor Level at the west elevation. Some of the cast stone window surrounds were set.

The electrical contractor was pulling his main power cable risers to the upper floor mechanical rooms.

Partitions were being roughed in with electrical at the 7th Floor.

Roof beams were hung out and roof joists were set. Roof decking began being laid down. Outriggers for the roof overhangs were being installed.

Exterior walls were being framed up at the 8th Floor, including the two towers.

Wood blocking continued to be installed at exterior window openings at the upper floors.

Copper piping continued to be run over the upper floors. Plumbing continued to be roughed in at interior walls on the upper floors.

Preparations were being made to set the elevator machinery at the top of the elevator shafts.

December 14, 2007, Underwood Plaza Update

2007-12-14T15:44:00.000-06:00

Exterior framing continued to be installed at the 7th Floor.

Interior partitions were being framed at the 8th Floor.

The parapet walls at the porches at the north elevation were being framed up and sheathed.

Wood windows continued to be installed at the west elevation.

Roof beams continued to be hung.

Copper and cast iron piping continued to be run at the upper floors.

Masonry installation began at the west elevation.

December 7, 2007, Underwood Plaza Update

2007-12-07T15:20:00.000-06:00

In preparation for installation of exterior doors and windows, perimeter membrane was being installed at openings.

Exterior sheathing continued to be installed at the north and south elevations. Exterior felt continued to be installed at the west elevation.

Exterior metal stud framing continued to be installed at the 7th Floor. Interior partitions were being framed at the 8th Floor.

Ductwork risers were being installed at the south chase.

The 9th Floor slab was poured.

Electrical cables were being pulled at the upper floors. Openings were cut at the upper floor slabs at the mechanical rooms in preparation for pulling the main electrical riser cables.

Copper and cast iron piping continued to be run at the upper floors.

Exterior patio doors and wood windows continued to be installed at the west elevation.

In preparation for commencement of exterior brick installation, foundation membrane waterproofing was run up onto the brick ledges.

Bathtubs were brought into the building.

Roof beams were being hung.

November 30, 2007, Underwood Plaza Update

2007-11-30T01:37:00.000-06:00

Interior partitions began being framed up at the 2nd Floor Level.

Slab edge angle was being installed at the 9th Floor Level. Metal decking and reinforcing mesh was installed for the 9th Floor slab. Floor drains, blockouts and sleeves were installed in preparation for the 9th Floor slab pour the coming week.

Sheathing board and framing for brick pilasters was being installed at the north elevation from a swinging stage. Interior partition walls were being framed up at the 7th Floor Level.

The fire pump was delivered to the site.

The electrical subcontractor continued running MC cable risers.

The elevator control gear was placed on the 8th Floor Level.

Brick and cast stone for the west elevation was delivered to the site. The mason mobilized, and his mortar silo was brought on site.

November 23, 2007, Underwood Plaza Update

2007-11-23T01:27:00.000-06:00

Formwork was removed at the 1st Floor slab poured last week at the southeast wing of the building.

The electrical subcontractor was running MC cable from the 1st Floor switchgear towards the upper floor riser location.

Sprinkler piping was being run over the 4th and 5th Floor Levels.

The mechanical subcontractor continued welding up steel hydronic piping for the risers and the roof top boiler room. Ductwork was being hung over the 6th Floor Level. PVC drain lines were being run over the 7th Floor Level.

Wood blocking continued to be installed at the exterior door and window openings.

Metal stud partitions continued to be framed up at the 6th Floor Level. Exterior metal studs were being installed at the 7th Floor Level.

Bar joists began being set and welded at the 9th Floor Level.

November 16, 2007, Underwood Plaza Update

2007-11-16T01:08:00.000-06:00

Slab edge formwork continued to be erected at the southeast wing of the main building and drainage rock continued to be placed.

Exterior metal studs continued to be installed at the 6th Floor Level, now at the east elevation.

Metal studs and sheathing board for the brick pilaster columns were being installed at the west elevation.

Columns above the 8th Floor splice point continued to be stood up and welded into place. Beams for the 9th Floor Level continued to be hung.

Diagonal bracing in conflict with corridor doors were relocated.

Metal grating at the north chase continued to be installed.

Wood blocking at exterior door and window openings continued to be installed.

Underwood Plaza Highlights Sheet

2007-11-13T17:22:00.000-06:00

Click here to view the Underwood Plaza highlights sheet.

November 11, 2007, Underwood Plaza Update

2007-11-11T15:54:00.000-06:00

The electrical contractor was laying out holes in the upper level slabs for their new proposed routing of conduits for power to the upper level mechanical rooms. The MC cables for the risers arrived on site.
Metal studs continued to be installed at the west exterior elevation at the 6th Floor.

Exterior balcony soffits were being sheathed at the west elevation. Interior walls were being framed at the 5th Floor. The brick pilaster back up framing and sheathing at the west elevation began to be installed.

Fireproofing was sprayed at the 6th to 7th Floor columns and at the 7th Floor framing.

Metal decking installation was completed at the 8th Floor. Both north and south stairs were installed up to the 8th Floor. Posts for the exterior balcony rails were welded in place at the 8th Floor.

Rebar was installed for the 8th Floor north terrace slab and wire mesh was installed at the remainder of the floor. Block outs and floor drains were installed, and the 8th Floor slab, along with the stairs up to the 8th Floor, was poured.

Expanded metal flooring was being installed at the north chase.

Aluminum clad wood doors and windows for the west elevation were placed up on the upper floors and installation began.

Fire sprinkler piping continued to be hung over the 1st Floor and was installed over the 2nd and 3rd Floors.

Underslab piping and conduits were installed for the 1st Floor slab at the southeast wing of the main building and edge form began to be installed.

Asphalt felt moisture membrane continued to be installed at the west elevation.

Mechanical piping installation continued at the main mechanical room on the 1st Floor. Domestic water piping continued to be installed at walls and above ceiling at the 4th Floor. Ductwork was being hung over the 5th Floor.

November 4, 2007, Underwood Plaza Update

2007-11-04T18:17:00.000-06:00

Beams continued were hung out and bar joists were set at the 8th Floor Level. Decking began to be installed.

A temporary trash chute was installed at the south elevation.

Exterior gypsum sheathing was being installed at the west elevation. Bump out features were being framed at the west elevation. Exterior studs at the 6th Floor Level at the west elevation began being installed. Interior partitions continued to be installed at the 5th Floor Level. Felt paper began being installed at the west elevation.

The foundation at Powerhouse Row was backfilled and compacted and covered with rock base. The Parking Deck entry drive from Powerhouse Avenue was cut and graded out.

Portions of the temporary shotcrete barricade wall along the north side of the building were removed.

The columns from the 4th to 5th Floor Level and the 5th Floor framing were sprayed with fire-proofing.

Work continued in the main 1st Floor Mechanical Room with piping continuing to be installed and disconnect switches being installed.

Wire mesh reinforcing for the 8th Floor slab and above was delivered.

The south stair was poured up to the 6th Floor Level.

Electrical and plumbing rough in continued at interior partition walls at the 4th Floor Level.

Expanded metal grating began being installed at the main north chase and concrete pads for heat pumps were poured at the 2nd and 3rd Floor Levels.

Fire sprinkler piping began being run over the 1st Floor Level.

October 26, 2007, Underwood Plaza Update

2007-10-26T23:19:00.000-05:00

Installation of perimeter angle and floor decking for the 7th Floor were completed. The 8th Floor Level beams began to be hung. Diagonal bracing continued to be welded in place below the 7th Floor framing. The south stair was being installed from the 5th to the 6th Floor Level.

Formwork was completed; anchor bolts were installed and the 8” foundation walls at the south half of Powerhouse Row were poured. Block-outs and wire mesh was installed, along with floor drains, and the 7th Floor slab was poured. The north stair was poured on up to the 7th Floor Level.

Ductwork continued to be hung over the 5th Floor Level. Plumbing rough-in continued at the 4th Floor Level interior partition walls. Mechanical piping and valves continued to be installed at the 1st Floor Level main mechanical room. Fire-stopping was being installed at the mechanical and plumbing piping risers at the upper floors.

Floor tracks for interior partition walls were being shot down at the east half of 5th Floor Level. Exterior studs were being installed at the west elevation of the 5th Floor Level. Hollow metal door frames were being set at the 4th Floor Level. The metal studs at the elevator lobby walls were being installed at the 4th Floor Level.

Sprayed fireproofing was being applied at the columns from the 5th Floor to the 6th Floor and at the 6th Level floor framing.

Electrical rough-in continued at the interior partition walls on the 4th Floor Level. The main cables had been pulled from the exterior into the main switchgear on the 1st Floor Level.

The elevator equipment, including machine and hoist beams, arrived on site.

Progress

2007-10-21T19:05:00.001-05:00

October 19, 2007, Underwood Plaza Update

2007-10-19T22:45:00.000-05:00

Sprayed fireproofing continued to be applied to the columns from the 3rd to the 4th Floor Levels and at the 4th Floor framing. Lathing for fireproofing was installed at the 5th Floor Level bar joists.

Formwork was stripped from the second half of the grade beams at Powerhouse Row. The 8” foundation walls atop the grade beams were formed.

The third lift of columns, from just above the 6th Floor Level to just above the 8th Floor Level continued to be erected and welded in place. The 7th Floor beams and bar joists continued to be installed. Edge angle and floor decking at the 7th Floor was being installed.

Wood blocking continued to be installed at the window openings on the 2nd through the 4th Floor Levels.

Exterior studs were installed at the north elevation at the 2nd Floor Level and at the east elevation at the 5th Floor Level. Interior partitions at the east half of the 4th Floor Level, along with the corridor walls on the 4th Floor, was being installed. Moisture-resistant drywall was installed at the upper floor mechanical rooms for installation of the main electrical panels.

Plumbing rough in was being installed at the interior partitions on the 4th Floor. Ductwork was being hung over the 5th Floor Level.

October 12, 2007, Underwood Plaza Update

2007-10-12T18:47:00.000-05:00

Exterior metal studs continued to be installed at the east and south sides of the 3rd and 4th Floors. Interior partitions continued to be framed up on the 4th Floor, now at the north end and around to the east half. Walls continued to be laid out on the 5th Floor. The storefront window and door openings at the 2nd Floor Level were framed up.

The next section of columns from above the 6th Floor to above the 8th Floor continued to be set and welded in place and beams for the 7th Floor continued to be hung. Bar joists began to be set at the 7th Floor Level.
Walls were laid out on the 6th Floor for use in locating holes for piping to be cored in the slab.

The second half of the grade beams at Powerhouse Row continued to be formed. Rebar was installed, the forms closed up and the remainder of the grade beams were poured.

The 4th Floor framing and columns between the 3rd and 4th Floors continued to be sprayed with fireproofing.

Cast iron drain lines and ductwork continued to be hung over the 4th Floor.

Electrical rough-in began at partitions walls on the 4th Floor.

Wood blocking began to be installed at exterior door and window openings at the 3rd through the 4th Floors.

October 5, 2007, Underwood Plaza Update

2007-10-05T18:24:00.000-05:00

The North Stairs, with rails, were erected from the 5th to the 6th Floor Level. The South Stairs were erected from the 3rd to the 5th Floor Level. Diagonal bracing continued to be welded up between the 5th and 6th Floor Levels. The next section of columns from the splice point above the 6th Floor up through the 8th Floor Level began to be erected. Beams for the 7th Floor Level began to be hung.

The 6th Floor slab was poured, finished and sawn. The second half of the grade beams at Powerhouse Row began to be formed up.

Exterior metal stud continued to be installed at the 3rd and 4th Floor Levels, moving around the north elevation to the east side. Interior partitions continued to be framed at the west half of the 4th Floor Level and around to the north end. Walls were laid out on the 5th Floor Level.

The main exhaust duct riser with fire dampers at the floor slabs was installed at the 3rd, 4th and 5th Floor Mechanical Rooms. Horizontal ductwork continued to be hung over the 4th Floor Level.

Cast iron waste lines and copper HVAC lines continued to be hung below the 5th Floor Level.

Control lines were established on the 6th Floor slab.

Temporary lights were run over the 5th Floor Level. Electrical panels began being installed at partition walls on the 4th Floor.

The fireproofer was back and began spraying columns between the 3rd and 4th Floors and began spraying the 4th Floor framing.

Bikes, Blues and Bar-B-Que took place the end of the week.

September 30, 2007, Underwood Plaza Update

2007-10-01T04:54:00.000-05:00

Crossland Concrete closed up form work and poured a portion of the grade beams at Powerhouse Row. By week’s end, formwork began to be removed. Rebar and mesh, along with block-outs, was installed for the 6th Floor Level slab pour.

Fayetteville Mechanical continued running cast iron drain lines and PVC condensate drain lines below the 4th Floor Level and continued hanging ductwork and running HVAC copper piping over the 4th Floor Level. They also laid out walls on the 5th Floor Level and cored holes in the slab for piping. Cast iron drain lines were installed below the 5th Floor Level. On Saturday, floor drains and block-outs were installed for the 6th Floor slab pour this coming week.

Midwest Drywall moved up to the 4th Floor and began studding the west exterior wall and interior walls at the west half of the floor. Scaffolding for the east elevation arrived and began to be erected. They also continued studding the west exterior wall at the 2nd Floor Level.

Crossland Steel finished hanging out the beams at the 6th Floor Level and set bar joists, along with bridging. Edge angles at the perimeter and at framed openings were set. Decking was installed. Bracing was installed below the 6th Floor Level and was welded in place.

Bill’s Electric received the main switchgear and set them in place at the First Floor Mechanical Room.

Walker Masonry was on site with representatives from Ryder Brick and Sioux City Brick. A sample panel was laid up.

September 21, 2007, Underwood Plaza Update

2007-09-23T07:21:00.000-05:00

Crossland Construction continued laying down 2 x 4 plates for the grade beam formwork at Powerhouse Row, uncovered the existing conduits feeding the existing pole lights along Dickson Street west of the site and began installing grade beam formwork at Powerhouse Row.

Midwest Drywall continued installing metal studs at the west exterior elevation and a portion of the south elevation at the 3rd Floor Level, including jambs, sills and insulated headers for window openings and was installing top and bottom track for metal studs at the west exterior elevation at the 2nd Floor Level.

Crossland Steel began hanging beams at the 6th Floor Level, continued welding up diagonal bracing between the 4th and 5th Floor Levels and began welding in place gusset plates atop the 5th Floor beams for diagonal bracing.

Fayetteville Mechanical continued welding up steel piping for the condenser water circulating system in the 1st Floor Mechanical Room, continued running cast iron and PVC piping below the 4th Floor Level and began hanging ductwork over the 4th Floor Level.

JD Steel installed a portion of the rebar for grade beams and pilasters at Powerhouse Row.

September 14, 2007, Underwood Plaza Update

2007-09-14T23:26:00.000-05:00

Crossland Construction removed concrete at the north shoring wall in order to allow the electrician to run conduit to re-feed the existing pole lights on Dickson Street west of our site, continued to de-water the foundation excavation at Powerhouse Row, was laying out control lines on the 4th Floor Level slab, began running 2 x 4 plates for the grade beam formwork at Powerhouse Row, installed rebar, wire mesh and block-outs at the 5th Floor Level for the concrete slab pour and did some upkeep on the storm water pollution prevention system.

Crossland Steel was running edge angle at framed openings and the perimeter of the 5th Floor Level in order to continue installing floor decking, moved the northeast stair to the 1st Floor Level for installation, finished decking the 5th Floor Level, was welding at the column splices between the 3rd and 4th Floor Levels and was setting diagonal bracing between the 4th and 5th Floor Levels.

Fayetteville Mechanical set the two condenser water circulating pumps and moved other equipment into the 1st Floor Level Mechanical Room, ran steel gas piping from the gas entry point at the southwest corner of the building up and over to the 2nd Floor Mechanical Room to rise up in the building, set floor drains and block-outs at the 5th Floor Level for the concrete slab pour, was installing tanks and piping over the 1st Floor Level Mechanical Room and was hanging cast iron drain piping below the 4th Floor Level.

Midwest Drywall began installing exterior metal studs at the west elevation at the 3rd Floor Level.
The 5th Floor Level slab was poured, finished and saw-cut.

September 8, 2007, Underwood Plaza Update

2007-09-08T09:56:00.000-05:00

Fayetteville Mechanical continued running copper HVAC piping and PVC piping over the 1st Floor, installed steel HVAC riser piping with run-outs at the 2nd Floor Mechanical Room, continued welding up steel HVAC piping for installation over the 2nd Floor, continued installing PVC risers in the Mechanical Room up through the 4th Floor, began installing gas piping at the 2nd Floor entry point, core drilled pipe penetrations at the 4th Floor slab and was running steel HVAC branch lines over the 2nd Floor.

Midwest Drywall installed drywall at the partition wall in the 1st Floor Mechanical Room, received metal studs in preparation for installation at the 2nd Floor exterior and continued laying out walls on the 2nd and 3rd Floors.

Crossland Steel installed steel posts and beams to support the stair entering the building at the northeast corner from Dickson Street to the 1st Floor, completed installation of bar joists at the 5th Floor and installed bridging, installed perimeter angle and angles at framed openings at the 5th Floor and began setting floor decking up on the 5th Floor.

Crossland Concrete removed forms from the concrete bases at the loggia columns at the 1st Floor, dressed up the concrete walls at the central staircase, installed rock base for the grade beams at Powerhouse Row and poured concrete at the south stair from the 2nd to 3rd Floor and at miscellaneous slab blockouts.

Bill’s Electric continued receiving electrical panels and equipment on site and set several panel boxes in the 1st Floor Mechanical room.

Max True Fireproofing installed lath at bar joists over the 3rd Floor.

Walker Masonry erected the 3 brick sample panels.

September 4, 2007, Underwood Plaza Update

2007-09-04T09:22:00.000-05:00

Crossland Steel continued hanging beams at the 5th Floor, set the north stairs and rails from the 3rd to the 4th Floor, set the south stairs from the 2nd to the 3rd Floor, began setting joists and running safety cables at the 5th Floor and was welding in diagonal bracing gusset plates on top of the 4th Floor beams.

Fayetteville Mechanical continued running cast iron and PVC piping over the 2nd Floor, installed HVAC valves and pressure tested HVAC piping over the 2nd Floor, roughed in floor drains and installed sleeves and block outs for the 4th Floor slab pour, set the booster pump in the 1st Floor mechanical room, continued bringing welded steel pipe fittings on site and continued welding up steel risers, continued running duct risers at the 2nd Floor, was hanging duct over the 3rd Floor and set the main condenser water risers at the mechanical room south of the elevator shaft from the 1st Floor up through the 4th Floor.

Bill’s Electric continued running conduits and boxes over the 1st and 2nd Floors, began running conduits and boxes over the 3rd Floor and set cans for the main gear in the 1st Floor mechanical room.

Midwest Drywall was on site and began laying out walls on the 2nd and 3rd Floors and framed up the divider wall in the 1st Floor mechanical room.

Crossland Concrete installed block-outs and wire mesh reinforcing for the 4th Floor slab pour. The 4th Floor slab was poured. Concrete bases were formed and poured at the 1st Floor loggia columns. The north stair was poured from the 3rd to the 4th Floor. Powerhouse Row was mucked out to begin forming grade beams.

August 27, 2007, Underwood Plaza Update

2007-08-27T10:31:00.001-05:00

The loose material at the pier at Powerhouse Row at grid E/2 was removed and the ground at the main portion of Powerhouse Row was cleaned up for grade beam installation. A corrugated pipe casing was installed at grid E/2 to allow drilling of that pier.

Slab edge form, plastic sheeting and wire mesh was installed, and the second pour was made at the 1st Floor Level slab-on-grade. Equipment pads were also poured in the main mechanical room. Slab edge forms for the first pour were removed, followed by the slab edge forms for the second pour.

Bill’s Electric was hanging boxes and conduits over the 1st Floor at Corridor 108 and began hanging boxes and conduits over the 2nd Floor. Temporary lighting and temporary power was installed over the 3rd Floor. Electrical panel boxes were delivered.

Fayetteville Mechanical continued installing HVAC piping over the 1st and 2nd Floors and capping off loops for future tenants. PVC piping began to be installed over the 2nd Floor. Cast iron waste piping, along with risers, along with ductwork, continued to be installed over the 2nd Floor.

Max True Fireproofing continued spraying fireproofing below the 3rd Floor.

Floor decking, along with safety cables, guardrails and covers, continued to be installed at the 4th Floor Level. Rebar was installed at the balcony areas.

Diagonal bracing continued to be welded off between the 3rd and 4th Floor Levels. 5th Floor Level beams began to be hung. Supports for the intermediary landings at the north and south stairs were installed between the 3rd and 4th Floors.